TEST THE FAN
17
Do not expose the remote control to rain or water.
Before using the remote control, remove the plastic
tab from the battery tray.
Turn on power to the fan location and test functionality
using the remote. Turn on the fan and test speed and
light brightness.
If you purchased the Haiku Wall Control, follow the
instructions packaged with the wall control to install
and set up SenseME
™
functionality.
For operation, maintenance, and troubleshooting
information, visit haikuhome.com/help
Turn on
the light
Turn on
the fan
Adjust fan speed
Adjust light
Whoosh
®
Sleep
Timer
Clear
To Next Page
Loading...
