Hakko Electronics FR-810 - User Manual

SMD Rework Station
Instruction Manual
Thank you for purchasing the HAKKO FR-810 SMD Rework Station.
This unit features:
● Digital control and display of time and temperature
● Digital control and display of air-flow rate
● Preset feature for programming temperature, time, and airflow settings
Please read this manual before operating the HAKKO FR-810.
Keep this manual readily accessible for reference.
1. PACKING LIST AND PART NAMES
2. SPECIFICATIONS
Power cord
HAKKO FR-810
station
Handpiece
Handpiece holder
handpiece holder
attachment plate
HAKKO FR-810 station
Handpiece holder
FP pick-up {withFP pick-up wire(SS)}
Heat resistant pad
Power cord
Instruction manual
1
1
1
1
1
1
電路板
水平支架
連接器
插座
● Handpiece
Power consumption
Total length (w/o cord)
Weight (w/o cord)
Power consumption
* This product is protected against electrostatic discharge.
* Specifications and design are subject to change without
notice.
● Station
Power consumption
Capacity (Airflow)
Control temperature
Outer dimensions
Weight
30 W
1 - 9 (5 - 115L/min*)
50 - 600℃ (120 - 1120℉)
160(W) × 145(H) × 220(D) mm
(6.3 × 5.7 × 8.7 in.)
1.5 kg (3.3 lb.)
* Airflow capacity is rated as free flowing. Restrictions
created by various nozzles may reduce the maximum
airflow capacity.
FP pick-up wire(SS)
FP pick-up
Air indicator Temp/Time indicator
Heat resistant pad
CAUTION
This product includes such features as electrically
conductive plastic parts and grounding of the
handpiece and station as measures to protect the
device to be soldered from the effects of static
electricity. Be sure to observe the following
instructions:
1. The handle and other plastic parts are not
insulators, they are conductors. When replacing
parts or repairing, take sufficient care not to
expose live electrical parts or damage
insulation materials.
2. Be sure to ground the unit during use.
Please check to make sure that all items
listed below are included in the package.
100V-670W 110V-810W 120V-790W
220V-1070W 230V-1170W 240V-1270W
250 mm (9.8 in.)
180 g (0.40 lb.)
100V-700W 110V-840W 120V-820W
220V-1100W 230V-1200W 240V-1300W

Hakko Electronics FR-810 Specifications