Do you have a question about the HAKO Hamster 800 V and is the answer not in the manual?
Specifies the proper applications and limitations of the Hako Hamster 800 V/E.
General safety rules, manual handling, and operator qualifications.
Details on proper and improper operating conditions and practices.
Identifies specific hazards associated with the machine's operation.
Initial setup steps before the machine's first use.
Procedure for safely refueling the Hako Hamster 800 V.
Daily checklist of pre-operation checks for the machine.
Explanation of how the Hako Hamster 800 V/E sweeps and collects dirt.
Identification and explanation of the machine's controls and indicators.
Detailed description of each control and its function.
How to activate and deactivate the wheel drive using the drive bar.
Details of the operating panel for the Hako Hamster 800 V, including key switch.
Function of the key switch for the Hako Hamster 800 E.
Procedure for switching on the machine for both Hako Hamster 800 V and 800 E.
Instructions for accelerating and steering the machine.
Procedure for stopping the machine and engaging the parking brake.
Steps for performing vacuumsweeping, including ventilation and waste types.
Troubleshooting common faults like engine speed drop and how to resolve them.
Maintenance tasks to be performed by the customer (daily/weekly).
Details the daily and weekly maintenance tasks to be completed by the customer.
Safety precautions and component identification before engine maintenance.
Overview of the battery system for the Hako Hamster 800 E and safety notes.
Procedure for charging the batteries, including initial charge and operation.
Procedure for installing new batteries approved by Hako.
Identification of drive components and safety precautions before work.
Procedure for adjusting the drive belt tension and friction wheel.
Procedure for checking side brush wear and adjusting its height.
Steps for replacing a worn side brush.
Procedure for changing the rotary brush segments.
How to adjust the sweeping pattern after brush changes or wear.