Need help?Do you have a question about the HAKO 980 E/EH and is the answer not in the manual?
Details on intended use, limitations, and manufacturer liability for the sweeper.
Information on warranty terms, exclusions, and steps for machine acceptance upon delivery.
General safety precautions, reading instructions, and operating within limits.
Explanation of warning symbols used in the manual.
Identifies safety and information labels on the machine.
Guidelines for safe operation and user qualifications.
Safety precautions related to cleaning the machine.
General guidelines for safe maintenance practices.
Specific safety advice for working with batteries.
Regulations and inspection requirements for the sweeper.
Explains the operational principles of the machine.
Details on cylinder broom, side brush, filter system, steering, and wheels.
Information on the brake system, travel drive, and hydraulic system components.
Overview of battery system options and plug connection coding for voltage and type.
Explanation of the low discharge signal sender, battery status, and hourmeter.
Steps for initial machine operation and proper battery charging before first use.
Step-by-step instructions for inserting batteries into the tray.
Detailed identification of all controls on the machine's panel.
Explanation of key controls like drive pedals, seat adjustment, and apron actuator.
Operation of levers, knobs, disposal release, and indicator lamps.
Use of the shaking system knob and the machine's key switch for control.
Step-by-step instructions for emptying the dirt hoppers on both models.
Critical safety steps to follow when operating the dirt hopper.
Procedures for safely starting, stopping, parking, and moving the machine.
Instructions for effective sweeping and safe transportation of the machine.
Detailed technical specifications including dimensions, weight, performance, tires, electrical, and hydraulic systems.
Measured noise emission and vibration data according to relevant standards.
Recommendations for regular maintenance and the overall service schedule.
Guides for replacing cylinder broom, side brush, filters, and adjusting sweeping track.
Procedures for V-belt maintenance and hydraulic fluid checks/refills.
Information on fuses, relays, and troubleshooting the electrical system.
List of optional accessories, their descriptions, and order numbers for purchase.
Summary of modifications related to Machine Directive 2006/42/EC, including safety and technical data.
To Next Page
General
