HAKO 980 E/EH - Battery Systems; Battery Configurations and Plug Coding

19
3 Battery Systems
Before commencing any
work on the electric system
disconnect the battery plug.
Do not use open flames
when handling batteries and
especially when checking
the battery acid level. Provi-
de for sufficient ventilation
in rooms where batteries
are charged. Spilled
(straight) battery acid must
not get into the sewage
system before having been
neutralised.
Comply with the regulations
imposed by law and obser-
ve local provisions.
Open the hood before char-
ging batteries; explosive ga-
ses may occur during the
charging procedure.
Battery Systems
Hako-Jonas 980 E / EH Qty. Order.-No.
Battery system A:
6V/240Ah GiV block battery, maintenance-free 4 7401
Cable set for battery connection 6503
24V/35A charger unit, 4003
variable IUIoIa and IUIoU characteristic,
230V AC
Battery system B:
24V/210Ah tray battery, EPzB, with Aquamatik 4201
24V/35A charger unit, 4003
variable IUIoIa and IUIoU characteristic,
230V AC
19
3 Battery Systems
Before commencing any
work on the electric system
disconnect the battery plug.
Do not use open flames
when handling batteries and
especially when checking
the battery acid level. Provi-
de for sufficient ventilation
in rooms where batteries
are charged. Spilled
(straight) battery acid must
not get into the sewage
system before having been
neutralised.
Comply with the regulations
imposed by law and obser-
ve local provisions.
Open the hood before char-
ging batteries; explosive ga-
ses may occur during the
charging procedure.
Battery Systems
Hako-Jonas 980 E / EH Qty. Order.-No.
Battery system A:
6V/240Ah GiV block battery, maintenance-free 4 7401
Cable set for battery connection 6503
24V/35A charger unit, 4003
variable IUIoIa and IUIoU characteristic,
230V AC
Battery system B:
24V/210Ah tray battery, EPzB, with Aquamatik 4201
24V/35A charger unit, 4003
variable IUIoIa and IUIoU characteristic,
230V AC