7.10 Adjust Steering Chain Tension
Check the condition and function of
steering chain every 200 hours of ope-
ration.
Proceed to adjustment of tension via a
spring located in the pedal area and
accessible after removal of the cover
plate.
We recommend having this adjust-
ment work done by qualified personnel
only.
Adjust tension of the stee-
ring chain such that rotatio-
nal movement is possible
without jerks.
7.11 Check Hydraulic Fluid and
Refill
7.11.1 Check Hydraulic Fluid
- Turn engine off and pull key
- Secure machine by engaging par-
king brake
- Open seat hood
- Check hydraulic fluid level at tank
(Fig. 25/1), the level must not fall
below the minimum mark (Fig.
25/2). It should read between mini-
mum (Fig. 25/2) and maximum mark
(Fig. 25/3).
7.11.2 Refill Hydraulic Fluid
- Remove cover (Fig. 24/4) and refill
hydraulic fluid
- Close hydraulic fluid tank with cover
Use DTE 15M hydraulic fluid or a fluid
of similar quality.
52
Maintenance/Service
Fig.25
7.10 Adjust Steering Chain Tension
Check the condition and function of
steering chain every 200 hours of ope-
ration.
Proceed to adjustment of tension via a
spring located in the pedal area and
accessible after removal of the cover
plate.
We recommend having this adjust-
ment work done by qualified personnel
only.
Adjust tension of the stee-
ring chain such that rotatio-
nal movement is possible
without jerks.
7.11 Check Hydraulic Fluid and
Refill
7.11.1 Check Hydraulic Fluid
- Turn engine off and pull key
- Secure machine by engaging par-
king brake
- Open seat hood
- Check hydraulic fluid level at tank
(Fig. 25/1), the level must not fall
below the minimum mark (Fig.
25/2). It should read between mini-
mum (Fig. 25/2) and maximum mark
(Fig. 25/3).
7.11.2 Refill Hydraulic Fluid
- Remove cover (Fig. 24/4) and refill
hydraulic fluid
- Close hydraulic fluid tank with cover
Use DTE 15M hydraulic fluid or a fluid
of similar quality.
52
Maintenance/Service
Fig.25
To Next Page
Loading...
