HAKO Scrubmaster B75 R User Manual

Hako Scrubmaster B75 R
Qualified persons only are authorised to operate the machine!
The machine is not designed for coarse material! Floor area sweeping before!
Use only cleaning agents suitable for automatic machines (low-foaming)!
Please pay attention to the informations in the instruction manual!
6
9
10
5
4
3
2
1
8
OPERATION
1. Disconnect mains plug of the charger and put it in front of the seat 1.
2. Fill the clear water tank from opening 2. Control the filling level by the
filling level indication 3.
3. Switch the mahchine on by the key switch 4. Actuate drive direction from
switch 5.
4. Press green button 6 to lower brush head 7 and squeegee 8, suction
turbine switches on.
5. Press pedal 9 machine moves and brush head drive switches on. Use lever
10 to adjust the water ( if necessary )
NOTE! Make sure that pads / brushes are installed!!!
7

HAKO Scrubmaster B75 R Specifications

General

Brand	HAKO
Model	Scrubmaster B75 R
Category	Scrubber
Language	English

Summary

Operation Guide

Pre-Operation Checks

Ensure pads or brushes are installed before operating the machine.

Filling and Water Level Control

Fill clear water tank and monitor filling level indication for proper operation.

Machine Activation and Controls

Switch on the machine, control drive direction, and activate brush/suction functions.

Machine Movement and Water Adjustment

Engage machine movement and brush drive with the pedal, adjust water with the lever.

Important Usage and Safety Notes

Adhere to qualified operation, material restrictions, cleaning agents, and manual instructions.

Maintenance and Care

Daily Maintenance Tasks

Emptying water tanks, cleaning filters, hoses, squeegees, and checking brushes/pads.

Weekly Maintenance Tasks

Cleaning brush head, machine exterior, and clear water filter.

Troubleshooting Poor Cleaning Results

Check for blockages in suction filter, hose, squeegee, or issues with tank lid sealing.