14
Open the 3 snap fasteners, these
are on the left-hand side of the back
rest cover. Once opened, flap the
cover to the right.
8. REMOVE/INSTALL THE COVER
Remove the buckle pad and inner cushion. (see page 8)
On the backrest where the shoulder strap is connected to the backrest,
there is a loop, pull the loop down to create a bigger gap. Once the gap is
big enough, slide the shoulder pad through this gap.
Remove the headrest cover. To remove the backrest cover,
pull the cover off the seat,
starting from the bottom and
lifting upwards.
Open the 2 snap fasteners on
each shoulder strap pad.
To Next Page
Loading...