Hama DR7 - Alarm and System Settings; Alarm Clock Configuration

9
8.2 Alarm clock
The radio allows you to set two different
alarm times.
• Conguration of alarm 1and alarm 2isidentical. They
allow two alarm times to be saved independently.
• Press [Settings] (3) to access the settings menu.
• Turn [Volume/Select/Navigate] (9) to navigate to the
‘Alarm clock’ menu item.
• Conrm your selection by pressing [Volume/Select/
Navigate] (9).
• Now select the desired setting and conrm your selection
by pressing [Volume/Select/Navigate] (9).
Time:
First choose the hour,then the minute at which the
alarm is to activate.
Duration:
Select the duration of the alarm.
Source:
Set whether you wish to be woken by an alarm tone
(buzzer), FM or DAB.
Mode:
Choose when the alarm is to activate:
Daily –Once –Onweekdays –Onweekends
Date:
First choose the day,then the month and year when the
alarm time begins.
Volume:
Select the volume for your alarm. With this setting, the
volume of the radio when you last operated it is irrelevant.
Mode:
Select whether you want to activate or deactivate the
alarm.
Note
• When using DABasanalarm tone, it is important to
have astable radio connection at the alarm time. If
this is not the case, the signal tone (buzzer) is used as
the alarm tone.
• It is recommended that you allow automatic time
updates. This ensures that the time is updated even
after disconnection of the power supply –for example,
in the case of apower failure.
8.3 Lighting
The backlight can be congured separately for each
operating mode (operation, standby).
• Press [Settings] (3) to access the settings menu.
• Turn [Volume/Select/Navigate] (9) to navigate to the
‘Lighting’ menu item. Conrm your selection by pressing
[Volume/Select/Navigate] (9).
• Now select the desired setting in the respective mode
and conrm your selection by pressing [Volume/Select/
Navigate] (9).
8.4 Factory Reset
• Press [Settings] (3) to access the settings menu.
• Turn [Volume/Select/Navigate] (9) to navigate to the
‘Factory settings’ menu item.
• Conrm your selection by pressing [Volume/Select/
Navigate] (9).
Conrm the following prompt with Yes to reset the radio
to the factory default settings. All settings made previously
aredeleted.
Note
• Resetting to the factory default settings can solve
some problems and malfunctions.
• However,all settings made previously,such as
favourites and station lists, arepermanently deleted.
8.5 Info /Software version
To have the radio display information about its software,
proceed as follows:
• Press [Settings] (3) to access the settings menu.
• Turn [Volume/Select/Navigate] (9) to navigate to the
‘SW version’ menu item.
• Conrm your selection by pressing [Volume/Select/
Navigate] (9).