Hama DR7 - Initial Setup; Language; 6 Dab; Search; Automatic Search

6
Additional Information
Press [Info]todisplay context-dependent additional
information. The information shown depends on the
operating mode as well as the current selection of radio
station.
• Description
Indicates the radio station, the current program,
contents, subjects, etc.
• Program genre/ country
Indicates the genre(music style) and the country or
region of the station.
• Bit-Rate
he currently received digital bit rate of the received
station is displayed.
• Codec
Species the encoding scheme used to digitise the data
or signal (such as MP3 or WMA).
• Sampling rate
Species the sampling rate, or the frequency with which
the audio signal is polled (Sampling-/Samplerate), in a
certain period of time.
• Signal strength
he signal strength of the received station is displayed via
abar and its length.
• Today´s date
• Time
• Signal error
• Service is not available
It´s displayed when thereiscurrently no DABreception.
Switching on /off
Press [VOLUME/SELECT/NAVIGATE] (9) to switch on the
radio.
Press and hold [VOLUME/SELECT/NAVIGATE] (9) for
approximately 3seconds to switch off the radio.
5.4 Initial setup
The station search in the operating mode DABstarts up
automatically when the radio is turned on for the rst time.
By default, the radio starts with the English menu
navigation. Set up your desired language as described in
5.5. Language.
5.5 Language
To change the menu language from that selected at rst-
time startup, proceed as follows:
• Press [Settings] (3) to access the settings menu.
• Turn [Volume/Select/Navigate] (9) to navigate to the
‘Language’ menu item.
• Conrm your selection by pressing [Volume/Select/
Navigate] (9).
• Turn [Volume/Select/Navigate] (9) to select your desired
system language.
• Conrm the selection by pressing [Volume/Select/
Navigate] (9).
6. DAB
The radio receives all established digital radio frequencies
in the range of 174 MHz (band III, channel 5A to 13F).
• Activate the DABmode on the radio by repeatedly
pressing [MODE] (1).
6.1 Search /Automatic search
The automatic DABchannel search scans the DABband III
for available stations. After the station search, all
interference-free stations aresaved in alphabetical order.
The automatic DABstation search starts automatically
when DABmode is started for the rst time; it is indicated
by Scanning… and astatus bar on the display.
If you would like to start the search again, proceed as
follows:
• Press [Settings] (3) to access the settings menu.
• Turn [Volume/Select/Navigate] (9) to navigate to the
‘Find all stations’ menu item.
• Conrm your selection by pressing [Volume/Select/
Navigate] (9).