Hama Duo - Getting Started; Inserting the Battery; Replacing the Battery

3
•Donot use the product in areas wherethe use of electronic devices is not permitted.
•Donot put the product near interference elds, metal frames, computers, TVs, etc. Electronic
devices and window frames can negatively affect the product’sfunctionality.
•Donot drop the product and do not expose it to any major shocks.
•Donot attempt to service or repair the product yourself.Leave any
and all service work to qualied experts.
•Donot modify the product in any way.Doing so voids the warranty.
•Dispose of packaging material immediately according to locally applicable regulations.
Warning –battery
•Immediately remove and dispose of dead batteries from the product.
•Only use batteries (or rechargeable batteries) that match the specied type.
•Donot mix old and new batteries or batteries of adifferent type or make.
•When inserting batteries, note the correct polarity (+ and -markings) and insert the
batteries accordingly.Failure to do so could result in the batteries leaking or exploding.
•Donot overcharge batteries.
•Keepbatteries out of the reach of children.
•Donot short circuit the batteries/rechargeable batteries and keep them away from
uncoated metal objects.
5. Getting Started
5.1 Inserting the battery
Remove the battery that was already inserted into the clock, remove the protective lm if
necessary as well as the contact interrupter and the re-insert the battery with the correct polarity.
The clock is ready for operation.
5.2 Replacing the battery
•Remove and dispose of any used batteries. Insert the new battery (AAA). Ensurethat the
polarity of the battery corresponds to the symbols in the battery compartment (10).