5
•Ifthe station still does not receive asignal, press the +/DCF button (6) for approx. 3seconds
to start the manual search for the DCF signal. The radio symbol starts to ash.
•Press the +/DCF button (6) to cancel the search.
6.2. Manually setting the date/time
Press and hold the ALARM ON/OFF SETTINGS button (7) for approx. 3seconds until the
weekday language blinks.
Set the following information in the order listed:
•Language, 12 or 24-hour format, year,month, day,hours, minutes, time zone (+12/-12).
•Toselect the individual values, press the +/DCF button (6) or the –button (5) and conrm
your selection by pressing the ALARM ON/OFF SETTINGS button (7) to apply the displayed
setting values and move on.
Note –Day of the week
Youcan choose from German (GE), English (EN), Dutch (DU), Italian (IT)orFrench (FR)for
the weekday display.Press the +/DCF button
(6) several times until the weekday display appears.
Note –Selecting 12 or 24-hour format
Use the +/DCF button (6) or –button (5) to switch between the
12 and 24-hour formats. With the 12-hour format, “PM” (12:00
to 0:00) is displayed to the left of the time.
To Next Page
Loading...
