6
Note
• The international standardheight for measuring air temperatureis
1.25 m(4ft) above ground.
Warning –Batteries
• Buy special or suitable installation material from aspecialised
dealer for wall-mounting.
• Ensurethat no faulty or damaged parts areinstalled.
• Never apply force during installation. This could damage the
product.
• Beforeinstallation, ensurethat the chosen wallissuitable for the
weight to be installation, and make surethat thereare no electrical
wires, water,gas or other lines in the wall at the installation site.
• We recommend installing the measuring station securely on an
outdoor wall.
• Install an anchor,screw,nail, etc. in the wall of your choice.
• Hang the measuring station using the opening intended for this
purpose (4).
6. Operation
6.1. Connection to the measuring station
• To connect the base station and the measuring station, place the two
devices as close together as possible.
• After you insert the batteries, the base station automatically searches
for aconnection to the measuring station and performs initial setup.
• If the device does not connect automatically,the manual search
program on the base station must be started.