Need help?Do you have a question about the Hameg HM8115-2 and is the answer not in the manual?
General| Type | Multimeter |
|---|---|
| Display | LCD |
| Max Voltage Measurement | 1000 V |
| Max Current Measurement | 10 A |
| Number of Channels | 1 |
| Frequency Measurement | 10 MHz |
| Interface | RS-232 |
| Power Supply | AC 100 V to 240 V |
| Voltage Range | 100 mV - 1000 V |
| Current Range | 100 μA - 10 A |
| Modes | Resistance, Frequency, Temperature |
| Basic Accuracy | 0.05% |
| Measurement Parameters | Voltage, Current, Resistance, Frequency, Temperature |
| Temperature Measurement | -200°C to +1372°C (with thermocouple) |
Formal statement of product compliance with EU directives.
Notes on EMI, susceptibility, and emission limits.
Guidelines for using shielded cables for data transfer.
Recommendations for shielded signal cables.
Advice on effects of strong fields on measurements.
Description of the HZ815 power adapter accessory.
Details on controls, displays, and measurement functions.
Technical specifications for connectivity.
General technical data like safety class and dimensions.
Explanation of safety and operational symbols.
Instructions for unpacking and device placement.
Guidelines for safe instrument handling and storage.
Critical safety warnings and precautions for operation.
Usage environment, warranty policy, and repair procedures.
Device care, voltage setting, and fuse replacement.
Description of the device's front interface elements.
Description of rear interface ports and connections.
Defines terms and covers basic average values.
Explains key AC measurement concepts.
Explains active and reactive power measurement.
Details on calculating the power factor.
Guidance for initial use and device self-check.
General overview of the instrument's controls and displays.
How to select voltage and current measurement ranges.
How to select power measurement types.
Instructions on measuring the power factor.
Details on the BNC output and operational examples.
Description of input/output ports and associated safety.
Information on fuses and interface connections.
Details on power input selection and connector.
Configuration for serial communication.
Setup for USB and IEEE-488 (GPIB) connectivity.
Basic commands for querying device information.
Commands for bus control and operating modes.
Software installation steps and program interface.
Configuration, measurement features, and removal.
Formal statement of product compliance with EU directives.
Notes on EMI, susceptibility, and emission limits.
Guidelines for cable usage to minimize EMI.
Advice on effects of strong fields on measurements.
Technical data for voltage, current, and power measurements.
Data on connectivity and other general specs.
Icon explanations and initial setup procedures.
Handling, storage, and critical safety warnings.
Usage environment, warranty policy, and service.
Device care, voltage setting, and fuse replacement.
Detailed description of front panel interface elements.
Detailed description of rear panel interface elements.
Defines terms and covers basic average values.
Explains key AC measurement concepts.
Explains active and reactive power measurement.
Details on calculating the power factor.
Guidance for initial use and device self-check.
General overview of the instrument's controls and displays.
How to select voltage and current measurement ranges.
How to select power measurement types.
Instructions on measuring the power factor.
Details on the BNC output and operational examples.
Description of input/output ports and associated safety.
Information on fuses and interface connections.
Details on power input selection and connector.
Configuration for serial communication.
Setup for USB and IEEE-488 (GPIB) connectivity.
Software installation steps and program interface.
Configuration, measurement features, and removal.
To Next Page
