Need help?Do you have a question about the Hameg HM8018 and is the answer not in the manual?
Formulas and limits for accuracy of R, L, C, Q, D, and phase angle measurements.
Critical safety warnings, protective conductor importance, and equipment symbols.
Overview of the LCR Meter HM8018's buttons, display, and indicators.
Explanation of the 6 impedance ranges and auto/manual selection.
Selecting main parameters (R, L, C) and secondary parameters (Q/D, impedance, phase).
Performing open/short calibration to compensate for parasitic impedances.
Formulas and limits for accuracy of R, L, C, Q, D, and phase angle measurements.
Critical safety warnings, protective conductor importance, and equipment symbols.
Overview of the LCR Meter HM8018's buttons, display, and indicators.
Explanation of the 6 impedance ranges and auto/manual selection.
Selecting main parameters (R, L, C) and secondary parameters (Q/D, impedance, phase).
Performing open/short calibration to compensate for parasitic impedances.
General| Type | Multimeter |
|---|---|
| Display | LCD |
| Max Voltage Measurement | 1000 V |
| Max Current Measurement | 10 A |
| Impedance | 10 MOhm (Voltage ranges) |
| Measurement Functions | Voltage, Current, Resistance, Frequency |
| Accuracy | 0.5% |
To Next Page
