7
How to Assemble
2. On underside of Lid, screw Stem
Cap onto Steam Release Valve
Stem. Push down Steam Release
Valve Cover over Stem Cap.
Ensure that Steam Release Valve
and Float Valve are clean and free
of debris.
3. Install Condensation Collector at
back of Cooker by aligning top of
Collector with guides on Cooker
and snap into place.
4. Place Cooking Pot into Base, and
add food to the Cooking Pot.
1. Ensure Gasket is properly
inserted into Lid. Align Gasket
behind metal ring and push
Gasket firmly into place.
5. On top of Lid, place Steam
Release Valve on Valve Stem.
Leave in open position ( ).
6. Place Lid on Cooker by matching
arrow icon on Lid with unlock
icon on Base. Rotate Lid
clockwise to lock. Arrow icon and
lock icon should align.
7. Turn Steam Release Valve to
closed position ( ).
To Next Page
Loading...
