Hamlet Solution User Manual

Hamlet Solution Wood & Multifuel Stoves 23
SERVICING & MAINTENANCE
FIRE DOOR GLASS
In the event of the door glass being broken it can
easily be replaced.
Note: This operation should only be carried out
when the appliance is unlit and cold.
•The door should be lifted off the hinges so that
the operations can be carried out on a
workbench or similar level surface.
•Unscrew the four hex bolts, on the inside of the
door securing the retaining clips.
•Carefully remove any pieces of broken glass, and
sealing gasket wearing suitable gloves.
•Re-place the gaskets and line them up in
relation to the door frame. (Fig. 17)
•Re-seat the new glass, ensuring the sealing gasket
is flat and in contact with the glass. (Fig. 18)
•Replace the four retaining clips and bolts. Do not
over-tighten the bolts as damage may occur to the
glass (Fig.19) Re-place the door carefully over the
hinges and slot in place.
Fig. 17. Lining up the gasket
Fig. 18. Fitting the glass
Fig. 19. Tightening the glass clips

Hamlet Solution Specifications

General

Material	Steel
Heat Output	5kW
Flue Size	125mm
DEFRA Approved	Yes
Type	Wood Burning
Flue Outlet	Top