2
!
HAMMER
FELDER KG
KR-Felder-Straße 1, 6060 Hall in Tirol, AUSTRIA
+43 (0) 5223 / 58 50 0
+43 (0) 5223 / 56 13 0
info@felder-group.com
www.felder-group.com
Bandsaw
N2-35
For the safety of all personnel, it is necessary to study this manual thoroughly before assembly and operation.
This manual must be kept in good condition and should be considered as part of the machine. Furthermore,
the manual must be kept to hand and within the vicinity of the machine so that it is accessible to operators
when using, maintaining or repairing the machine.
Attention!: The machine must be inspected immediately upon arrival. If the machine has been damaged during
transport, or if any parts are missing, a written record of the problems must be submitted to the forwarding
agent and a damage report compiled. Also be sure to notify your supplier immediately.
A product of the FELDER GROUP!
To Next Page
