To Next PageTo Next PageWhat to do if the red Stop button on my Hammer K2 M doesn't work?
If the red Stop button on your Hammer Saw doesn't immediately halt the machine, it indicates a fault within the electrical system. To address this, first disconnect the Hammer Saw from the main power supply. After that, it's important to contact the Felder-Group service center for assistance.
Information on changing saw blades and grooving tools safely.
Step-by-step guide for installing and removing saw blades.
Procedures for operating machine power and emergency stop functions.
Overview of regular maintenance tasks and their intervals.
Steps for preparing the machine and removing covers for maintenance.
Verifying the functionality of emergency stop buttons and safety devices.
Ensuring safety limit switches are functioning correctly.
Immediate actions to take when the machine malfunctions.
Common machine faults, their causes, and recommended remedies.
General
