Hammer Solid XP Bank - 3 Assembly; Check List

3. Assembly
15
In order to make assembly of the gym as easy as possible for you, we have preassembled the most important parts.
Before you assemble the equipment, please read these instructions carefully and then continue step by step as described
Contents of packaging
 Unpack all individual parts and place them alongside each other on the floor.

Mtallparts can damage / scratch your floor., so please use a pad. The pad should be flat and not too thick, so that the gym has a stable
stand.
 Make certain that you have adequate room for movement (at least 1.5 m) on all sides during assembly.
3.1 Check list