HAMPTON BAY 1000 - User Manual

Need help?

Do you have a question about the HAMPTON BAY 1000 and is the answer not in the manual?

Summary

Safety Information

General Safety Precautions

Essential safety guidelines for operating the fire pit, including fire hazards and user protection.

Warranty Information

Warranty Coverage Details

Specifies what aspects of the fire pit are covered under the limited warranty.

Warranty Exclusions

Lists conditions and usage types not covered by the product warranty.

Pre-Assembly Preparation

Assembly Planning and Parts Check

Guidance for checking all parts and planning the assembly process.

Required Tools and Hardware

Lists necessary tools and the included hardware components for assembly.

Package Contents

Fire Pit Components List

Identifies all parts included in the package with their respective labels and quantities.

Assembly Steps

Assembling the Mesh Cover

Step-by-step guide for attaching the handle to the mesh cover.

Assembling the Fire Pit Stand

Instructions for attaching the stand components to the fire bowl.

Attaching the Decoration Ring

Procedure for connecting the decoration ring to the fire pit stand.

Completing the Assembly

Final steps to complete the fire pit assembly, including placing the poker.

Operation and Maintenance

Lighting and Extinguishing the Fire

Steps for safely lighting and putting out the fire in the fire pit.

Fire Pit Care and Cleaning

Guidelines for cleaning and storing the fire pit to ensure longevity.

Service Parts Identification

Replacement Parts and Hardware

Details of available replacement parts and hardware for the fire pit.

Summary

Safety Information

General Safety Precautions

Essential safety guidelines for operating the fire pit, including fire hazards and user protection.

Warranty Information

Warranty Coverage Details

Specifies what aspects of the fire pit are covered under the limited warranty.

Warranty Exclusions

Lists conditions and usage types not covered by the product warranty.

Pre-Assembly Preparation

Assembly Planning and Parts Check

Guidance for checking all parts and planning the assembly process.

Required Tools and Hardware

Lists necessary tools and the included hardware components for assembly.

Package Contents

Fire Pit Components List

Identifies all parts included in the package with their respective labels and quantities.

Assembly Steps

Assembling the Mesh Cover

Step-by-step guide for attaching the handle to the mesh cover.

Assembling the Fire Pit Stand

Instructions for attaching the stand components to the fire bowl.

Attaching the Decoration Ring

Procedure for connecting the decoration ring to the fire pit stand.

Completing the Assembly

Final steps to complete the fire pit assembly, including placing the poker.

Operation and Maintenance

Lighting and Extinguishing the Fire

Steps for safely lighting and putting out the fire in the fire pit.

Fire Pit Care and Cleaning

Guidelines for cleaning and storing the fire pit to ensure longevity.

Service Parts Identification

Replacement Parts and Hardware

Details of available replacement parts and hardware for the fire pit.

This document is a Use and Care Guide for the Hampton Bay Ashmore Fire Pit, Model #FT-01H, Item #1000. It provides comprehensive information on assembly, operation, maintenance, and safety for the product.

Function Description

The Hampton Bay Ashmore Fire Pit is an outdoor appliance designed for burning untreated wood or fire logs. It serves as a source of warmth and ambiance for outdoor spaces. The fire pit is not designed for cooking food.

Important Technical Specifications

Model Number: FT-01H
Item Number: 1000
Warranty: 1-year limited warranty on the metal frame against manufacturing defects for the original purchaser.
Hardware Included:
- M6 x 10 mm Bolts (AA): 8 pieces
- M6 x 16 mm Bolts (BB): 4 pieces
- M6 Nuts (CC): 1 piece
Tools Required for Assembly: Phillips screwdriver, M6 wrench (not included).
Components:
- Handle (A): 1
- Mesh Cover (B): 1
- Wood Grate (C): 1
- Fire Bowl (D): 1
- Stand (E): 4
- Decoration Ring (F): 1
- Poker (G): 1

Usage Features

Safety Information:

Outdoor Use Only: The fire pit is strictly for outdoor use.
Supervision: Never leave a fire unattended.
Fuel Type: Burn only untreated wood or fire logs. Do not burn more than 5 lbs of fuel.
Prohibited Fuels: Do not use gasoline or kerosene to start the fire.
No Cooking: The fire pit is not designed for grilling food.
Surface Requirements: Do not use on wood decks, long or dry grass, leaves, or other combustible surfaces.
Child and Pet Safety: Keep children and pets away from the fire pit without supervision.
Hot Surfaces: Do not touch the surface of the fire pit while in use as it may cause burns. Do not attempt to move the fire pit while it is hot or in use.
Clearance: Place the fire pit no closer than 8 ft. from walls or combustibles during use.
Ventilation: Never burn in vehicles, tents, or indoors due to carbon monoxide hazard.
Mesh Cover: Always ensure the mesh cover is secured over the fire bowl while in use. Use the provided poker and/or heat-resistant gloves to open/close the mesh cover.
Extinguishing Fire: Do NOT use water to extinguish the fire as it is dangerous and can damage the fire pit. Allow the fire to burn itself out.
Poker Handle: The poker handle may become hot during and after use.
Fire Extinguishing Material: Adequate fire extinguishing material should be readily available.
Proposition 65 Warning: Fuel used in wood and charcoal burning appliances and their combustible products contain chemicals known to cause cancer, birth defects, or other reproductive harm.

Assembly: The assembly process involves several steps:

Assembling the Mesh Cover: Insert the handle (A) into the mesh cover (B) and secure it with a nut (CC). Tighten with an M6 wrench. Gloves are recommended during assembly.
Assembling the Stand: Attach the four stand pieces (E) to the fire bowl (D) using M6x10 mm bolts (AA). Do not tighten the bolts at this step.
Attaching the Decoration Ring: Attach the decoration ring (F) to the stand (E) using M6x16 mm bolts (BB). Securely tighten all bolts with an M6 wrench.
Completing Assembly: Place the poker (G) near the fire pit for use.

Operating Instructions:

Lighting:
- Place a layer of dry seasoned hardwood, covering no more than ¼ of the fire bowl.
- Use a long match or stick lighter to ignite the fuel.
- Use the provided poker to operate the fire pit. Wear heat-resistant gloves during use.
Extinguishing the Fire:
- Allow the fire to burn itself out naturally.
- Do NOT use water to extinguish the fire, except in an emergency, as it is dangerous and can damage the fire pit.

Maintenance Features

General Maintenance:

Post-Use Cleaning: Clean the fire pit after each use to extend its lifespan.
Finish Protection: Use a soft cloth instead of bare hands when handling to protect the fire pit's finish.
Ash Removal: Clean the fire bowl after each use once the ashes have cooled completely.
Storage: Store the assembled fire pit in a cool, dry location, away from children and pets.

Care and Cleaning:

Cool Down: Do not attempt to clean the fire pit until the fire is completely out and the unit has cooled completely.
Cleaning Tools: Use a soft cloth to wipe the fire pit and poker.
Hot Cleaning: Do not attempt to clean the fire pit while it is hot.
Covering: Keep the fire pit covered when it is cooled and not in use.

Customer Service: For questions, problems, or missing parts, contact Hampton Bay Customer Service at 1-855-HD-HAMPTON.