This document is an instruction manual for the Hampton Bay Exterior Wall Lantern, identified by Home Depot SKU# 408-179 and UPC# 046335848276. The manual provides detailed instructions for assembly, installation, troubleshooting, and maintenance, along with a limited warranty. It is presented in English, Spanish, and French.
Function Description:
The Hampton Bay Exterior Wall Lantern is designed as an outdoor lighting fixture. Its primary function is to provide illumination for exterior spaces, enhancing visibility and aesthetic appeal. The lantern is a wall-mounted unit, featuring a classic design with multiple light bulbs enclosed within a protective housing. It is intended for permanent installation on an exterior wall, connecting to a standard electrical supply. The fixture is built to withstand outdoor elements, offering a weather-resistant finish.
Important Technical Specifications:
- Product Type: Exterior Wall Lantern
- Brand: Hampton Bay
- Home Depot SKU: 408-179
- UPC: 046335848276
- Construction Material: Solid cast aluminum, which resists elements and ensures durability.
- Light Bulbs: Requires 3 light bulbs.
- Maximum Wattage: Each light bulb should not exceed 60 watts (incandescent light bulb recommended).
- Power Source: Designed for connection to a standard household electrical supply, requiring a circuit breaker or fuse box connection.
- Mounting: Wall-mounted, utilizing a mounting bracket and nipple system for secure attachment to an outlet box.
- Weather Resistance: The finish is weather-resistant, though it will naturally weather and fade over time.
- Motion Sensor: The manual explicitly states there are no serviceable parts inside the motion sensor, implying that if a motion sensor is present (which is not explicitly detailed as a standard feature for this specific model but mentioned in a general caution), it is a sealed unit. However, the diagrams and parts list do not show a motion sensor, suggesting this caution might be a generic safety note for similar products.
Usage Features:
- Easy Installation: The manual highlights "Easy to install" as a key feature, indicating a user-friendly setup process.
- Durable Construction: Made from solid cast aluminum, the lantern is designed to resist outdoor elements, ensuring longevity and reliability in various weather conditions.
- Aesthetic Design: The visual representation of the lantern showcases a traditional, ornate design, suggesting it is intended to complement classic or rustic exterior decors.
- Illumination: With three light bulbs, the lantern provides ample light for outdoor areas, improving safety and ambiance.
- Secure Mounting: The installation process involves a mounting bracket, nipple, and thumb screw to ensure the fixture is securely fastened to the wall, preventing accidental dislodgement.
- Caulking Recommendation: For enhanced weather protection, the manual recommends caulking the upper two-thirds of the wall plate to the mounting surface, while leaving the bottom third un-caulked for drainage. This feature helps prevent water intrusion while allowing any trapped moisture to escape.
Maintenance Features:
- Exterior Cleaning: For cleaning the outside of the fixture, a dry or slightly dampened clean cloth (using clean water, never a solvent) is recommended. This simple method helps preserve the finish without causing damage.
- Interior Cleaning: To clean the inside of the fixture, it is crucial to first disconnect power by turning off the circuit breaker or removing the fuse. Afterward, a dry or slightly dampened clean cloth (using clean water, never a solvent) should be used to wipe the interior surface. This emphasizes safety and the use of gentle cleaning agents.
- Avoid Harsh Cleaners: The manual explicitly advises against using cleaners with chemicals, solvents, or harsh abrasives. Instead, it recommends using only a dry, soft cloth for dusting or careful wiping. This guidance is vital for maintaining the integrity of the fixture's finish and internal components.
- Troubleshooting Guide: A dedicated troubleshooting section is provided to help users diagnose and resolve common issues such as lights not turning on, bulbs not illuminating, or circuit breakers tripping. This self-help feature empowers users to address minor problems without professional assistance.
- Customer Support: For questions, problems, or missing parts, users are directed to call the Customer Service Team at 1-877-527-0313 or visit www.homedepot.com, referencing the SKU or UPC. This ensures that support is readily available for more complex issues or part replacements.
- Proof of Purchase: Users are advised to keep their receipt and the instruction manual as proof of purchase, which is essential for warranty claims.
- Limited Warranty: The manufacturer offers a three-year limited warranty from the date of purchase, covering defects in materials and workmanship under normal use and service. This warranty provides assurance to the consumer regarding the product's quality and offers repair or replacement options if defects occur. However, it explicitly excludes damage from misuse, abuse, accidents, modifications, alterations, neglect, mishandling, improper installation, or normal wear and tear of the finish. It also disclaims liability for consequential or incidental losses, including labor/expense costs.
Need help?
General
To Next Page
