To Next PageTo Next PageWhat to do if my HAMPTON BAY ELSMERE Lantern light will not turn on?
If your HAMPTON BAY Lantern light won't turn on, first ensure the power supply is active. If the power is on, test or replace the switch. Then, check the wiring and replace the light bulb to resolve the issue.
General| Brand | HAMPTON BAY |
|---|---|
| Model | ELSMERE |
| Category | Lantern |
| Language | English |
Details the manufacturer's warranty coverage for defects in materials and workmanship for three years.
Lists exclusions from warranty, including improper installation, misuse, accidents, and normal wear.
Read all instructions before assembly and installation; disconnect power before starting.
Lists necessary tools like screwdrivers, wire cutters, pliers, ladder, and safety goggles.
Details the included hardware parts such as screws, wire nuts, and mounting plates.
Thread mounting screws into the mounting plate and attach the plate to the outlet box.
Connect fixture wires to supply wires using wire nuts and electrical tape.
Align and secure the fixture base to the mounting plate using fixture screws.
Install the bulb and secure the fixture base post using cage screws.
Turn on power at the circuit breaker or fuse box to activate the fixture.
Use a dry or slightly dampened clean cloth to wipe the fixture surface.
Disconnect power and use a dry or slightly dampened cloth to wipe the interior surface.
Check power supply, switch, wiring, and replace the light bulb.
Check wire connections when the fuse blows or circuit breaker trips.
