HAMPTON BAY ELSMERE - Operation; Turn On Power; Care and Cleaning; Exterior Maintenance

Operation
 Turn on power at the circuit breaker or fuse box.
 Turn the light switch on to activate the fixture.
7
EXTERIOR MAINTENANCE
 Use a dry or slightly dampened clean cloth and wipe
the surface of the fixture.
INTERIOR MAINTENANCE
 Disconnect power to the fixture by turning off the
circuit breaker or by removing the fuse at the fuse
box.
 Use a dry or slightly dampened clean cloth to wipe
the interior surface of the fixture.
Care and Cleaning
Troubleshooting
Problem
Solution
The light will not turn on.

Make sure the power supply is on.

Test or replace the switch.

Check the wiring.

Replace the light bulb.
The fuse blows or the circuit breaker trips when the light is turned
on.

Check the wire connections.
NOTE: Do not use any cleaners with chemicals,
solvents, or harsh abrasives. Use only a dry
soft cloth to dust or wipe carefully.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further
assistance.