HAMPTON BAY Ashmore FT-01H

Need help?

Do you have a question about the HAMPTON BAY Ashmore FT-01H and is the answer not in the manual?

Summary

Safety Information

General Safety Guidelines

Covers safe outdoor use, unattended fire, fuel type, and supervision of children/pets.

Operational Safety Precautions

Details safe handling, touching hot parts, using the poker, and mesh cover safety.

Fire Extinguishing and Chemical Warnings

Advises against water for extinguishing and notes chemical exposure risks.

Warranty

Warranty Coverage and Exclusions

Outlines what the limited warranty covers and what it does not.

Warranty Service Contact

Provides contact information for warranty-related inquiries.

Pre-Assembly

Planning Assembly and Parts Check

Guides on preparing for assembly by checking parts and reading the manual.

Required Tools

Lists the tools necessary for assembling the fire pit.

Hardware Included

Details the specific hardware components provided for assembly.

Package Contents

Identifies all the individual parts included in the product package.

Assembly

Assembling the Mesh Cover

Instructions for attaching the handle to the mesh cover.

Assembling the Stand

Steps for connecting the stand components to the fire bowl.

Attaching the Decoration Ring

Guides on how to secure the decorative ring to the stand.

Completing the Assembly

Final steps to finish the fire pit assembly, including poker placement.

Operating Instructions

Lighting the Fire Pit

Provides guidance on how to safely light the fire pit.

Extinguishing the Fire

Details the correct procedures for putting out the fire safely.

Maintenance

Post-Use Cleaning and Storage

Recommendations for cleaning the fire pit after each use and proper storage.

Care and Cleaning

Cleaning Procedures

Specific instructions for cleaning the fire pit components safely.

Service Parts

Parts Identification

Lists and illustrates all available parts for service or replacement.

The Hampton Bay Ashmore Fire Pit (Item #1001 802 046, Model #FT-01H) is an outdoor wood-burning fire pit designed for recreational use. It is intended to provide warmth and ambiance in an outdoor setting.

Function Description:

The Ashmore Fire Pit serves as a contained unit for burning untreated wood or fire logs outdoors. It is not designed for cooking food. The fire pit consists of a fire bowl where the wood is placed, a wood grate to support the fuel, a mesh cover to contain sparks and embers, and a stand to elevate the fire bowl from the ground. A handle is attached to the mesh cover for easy removal and placement, and a poker is provided for safely managing the fire and the mesh cover.

Important Technical Specifications:

The manual provides a list of components and hardware, including:

Fire Bowl (D): 1 unit
Mesh Cover (B): 1 unit
Wood Grate (C): 1 unit
Stand (E): 4 units
Decoration Ring (F): 1 unit
Handle (A): 1 unit (for the mesh cover)
Poker (G): 1 unit
Hardware:
- M6 x 8 mm Bolts (AA): 8 units
- M6 x 16 mm Bolts (BB): 4 units
- M6 Nuts (CC): 1 unit
Tools Required for Assembly: Phillips screwdriver and M6 Wrench (not included).

Usage Features:

Outdoor Use Only: The fire pit is strictly for outdoor use to prevent carbon monoxide hazards and fire risks indoors.
Fuel Type: Only untreated wood or fire logs should be burned. The manual explicitly warns against using gasoline or kerosene to start the fire and against burning more than 4 lbs of wood.
Safety Precautions:
- Never leave the fire unattended.
- Keep children and pets away from the fire pit without supervision.
- Do not touch the surface of the fire pit while in use, as it can cause burns.
- Do not move the fire pit while it is hot or in use.
- Place the fire pit no closer than 8 ft from walls or combustibles.
- Always ensure the mesh cover is secured over the fire bowl while in use to contain sparks.
- Use the provided poker and/or heat-resistant gloves to open/close the mesh cover.
- Adequate fire extinguishing material should be readily available.
- Do not use water to extinguish the fire, as this is dangerous and can damage the unit. Allow the fire to burn itself out.
- Avoid using the unit on wood decks, long or dry grass, leaves, or other combustible surfaces.
Lighting Instructions:
- Place a layer of dry seasoned hardwood in the fire bowl.
- Use a long match or stick lighter to ignite the wood.
- Use the poker to manage the fire, wearing heat-resistant gloves.
Assembly: The assembly process involves attaching the handle to the mesh cover, securing the stand components to the fire bowl, and then attaching the decoration ring to the stand. The manual advises against fully tightening bolts until all components are in place to allow for adjustment. Gloves are recommended during assembly.

Maintenance Features:

Regular Cleaning: To extend the life of the fire pit, it should be cleaned after each use.
Cool-Down Period: Do not attempt to clean the fire pit until the fire is completely out and the unit has cooled completely. Do not clean while hot.
Cleaning Method: Use a soft cloth to wipe the fire pit and poker. Avoid using bare hands while handling to protect the finish.
Ash Removal: Clean the fire bowl after each use once ashes have cooled.
Storage: Store the assembled fire pit in a cool, dry location, away from children and pets. Keeping the fire pit covered when cooled and not in use is recommended to protect it from elements.
Warranty: The product comes with a 1-year limited warranty covering manufacturing defects in the metal frame to the original purchaser. The warranty does not cover commercial use, hardware, acts of nature, fire, freezing, abusive use, or purchased parts.

The manual emphasizes the importance of reading and understanding the entire guide before assembly, operation, or installation, and advises consumers to check state, provincial, and local codes and regulations regarding product use. Customer service contact information is provided for questions, problems, or missing parts.