HAMPTON BAY FT-51161 - Decoration Ring Installation; Final Assembly Steps

6
Installation (continued)
3
Decoration Ring Installation
□ Insert decoration ring (C) into hole in fire bowl (D).
□ Use wrench (not included) to secure M6 nut (BB) to
inside of fire bowl (D).
CAUTION:
Please wear glove during installation.
4
Installation Done
□ Place the mesh cover (B) on the base assembly..
□ Place the poker (F) conveniently near fire pit.
CAUTION:
Please wear glove during installation.
D
C
B
D
F