5 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Installation
1
Mesh Cover Installation
□ Insert handle (A) into hole in mesh cover (B).
□ Use wrench (not included) to secure M6 nut (BB) to
understand of mesh cover (B).
CAUTION:
Please wear glove during installation.
2
Stand Installation
□ Attach the stand (E) to fire bowl (D) using
M6x10mm bolt (AA).
□ Tighten with Phillips screwdriver (not included).
CAUTION:
Please wear glove during installation.
B
To Next Page
Loading...
