To Next PageTo Next PageWhat to do if my HAMPTON BAY Fan will not start?
If your HAMPTON BAY Fan won't start, begin by checking the main and branch circuit fuses or breakers. Also, inspect the line wire connections to the fan and the switch wire connections within the switch housing.
Why is my HAMPTON BAY HAVANA so noisy?
If your HAMPTON BAY Fan is noisy, there are several things you can check: * Make sure all motor housing screws are snug. * Ensure the screws attaching the fan blade bracket to the motor hub are tight. * Verify that wire nut connections aren't rattling against each other or the switch housing's interior. * If you're using a light kit, tighten the screws securing the glassware and check the bulbs are secure. * Confirm the canopy has a small gap from the ceiling and isn't touching it. * Check that your outlet box is secure and rubber isolator pads were used between the mounting plate and outlet box. Also, allow the fan a 24-hour “breaking in” period, as most new fan noises disappear during this time.
How to fix a HAMPTON BAY HAVANA that wobbles?
To address a wobble in your HAMPTON BAY Fan, start by checking that all blade and blade arm screws are secure. Most wobble issues arise from unequal blade levels. To check this, measure from a point on the ceiling to a point on the center of each blade; deviations should be within 1/8". Run the fan for ten minutes. If the wobble persists, use the provided blade balancing kit.
General| Brand | HAMPTON BAY |
|---|---|
| Model | HAVANA |
| Category | Fan |
| Language | English |
Essential safety guidelines for installation and operation of the ceiling fan.
Important warnings regarding electrical safety, personal injury, and correct fan usage.
Detailed instructions and safety precautions for mounting the fan to various ceiling structures.
Steps to prepare fan parts and the mounting bracket for installation.
Instructions for correctly routing electrical wires through the fan assembly.
Steps for connecting the downrod, hanger pin, and locking pin to the motor housing.
Procedure for securely attaching the fan's mounting bracket to the electrical outlet box.
