EasyManua.ls Logo

HAMPTON BAY HB50 - Installation Requirements; Leave at Least 10 Clearance; Close Windows and Doors; Plug In

HAMPTON BAY HB50
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
2. INSTALLATION REQUIREMENTS
D [I El
_ Front of unit
]
This dehumidifier has been carefully engineered,
manufactured and tested to give you many years
of comfort and dependable operation.
THIS IMPORTANT INFORMATION tells you all
you need to know about installing, using and car-
ing for your new Dehumidifier. Keep it handy, it
will answer your questions, save you time and
expense of unnecessary service calls, and insure
that, as the owner of this superb appliance, you
receive maximum comfort and enjoyment for
many years.
Leave at Least 10" Clearance
Your dehumidifier must be kept clear of any
restrictions to air flow. Position unit at least
10" away from walls or other obstructions (Fig. 3).
Close Windows and Doors
To assure efficient dehumidification, close all win-
dows and doors in the area where the dehumidifi-
er is to operate (Fig. 4).
Plug In
Once you have assembled your dehumidifier and
installed it in an appropriate location, plug the
cord into a properly grounded outlet as indicated
in the electrical requirements (Fig. 5).