To Next PageTo Next PageWhat to do if my HAMPTON BAY Fan will not start?
If your HAMPTON BAY Fan doesn't start, begin by checking the main and branch circuit fuses or breakers. Also, inspect the line wire connections to the fan and the switch wire connections within the switch housing to ensure they are properly connected.
Why is my HAMPTON BAY SCENIC 92302 wobbling?
If your HAMPTON BAY Fan is wobbling, make sure that all blade and blade arm screws are secure. Also, most fan wobble problems are caused when blade levels are unequal, so check the blade levels. Any measurement deviation should be within 1/8 in. Run the fan for ten minutes.
How to fix a noisy HAMPTON BAY SCENIC 92302 Fan?
If your HAMPTON BAY Fan is noisy, ensure all motor housing screws are snug and that the screws attaching the fan blade bracket to the motor hub are tight. Also, make sure the wire nut connections aren't rattling against each other or the interior wall of the switch housing. Allow a 24-hour “breaking in” period, as most noises disappear during this time. Finally, verify that your outlet box is secure and rubber isolator pads were used between the mounting plate and outlet box.
General| Brand | Hampton Bay |
|---|---|
| Type | Ceiling Fan |
| Fan Diameter (in.) | 52 |
| Number of Blades | 5 |
| Dimmable | Yes |
| Reversible Motor | Yes |
| Light Kit Included | Yes |
| Model | 92302 |
| Blade Span | 52 inches |
| Bulb Type | LED |
Crucial warnings for preventing electrical shock, injury, and fire hazards during installation and use.
Technical specifications including size, speed, power, and weight of the fan.
List of necessary tools for the proper installation of the ceiling fan.
List and descriptions of all hardware components included with the fan for installation.
List and illustrations of all parts included in the product package.
Instructions and warnings for mounting the fan to the ceiling electrical box.
Steps for removing the mounting plate from the fan motor assembly.
Instructions for securely attaching the fan mounting plate to the electrical box.
Steps for hanging the fan motor assembly onto the mounting plate.
Guide for connecting the fan's electrical wires to the household wiring.
Instructions for attaching the motor housing to the mounting plate.
Steps for fastening the center band to the motor housing.
Instructions for securely attaching the fan blades to the motor assembly.
Steps for installing the light kit pan to the fan motor assembly.
Instructions for attaching the light kit fitter assembly to the light kit pan.
Steps for installing the glass shade onto the light kit pan.
Explanation of pull chain speeds, slide switch direction, and warm/cool weather modes.
Guidelines for cleaning the fan to maintain its appearance and prevent damage.
Solutions for common issues like the fan not starting, noise, or wobbling.
