EasyManua.ls Logo

HAMPTON BAY SOUTHWIND - User Manual

HAMPTON BAY SOUTHWIND
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
®
Item # 1002 705 999, 1002 717 208, 1002 706 115
Model #91371, 91372, 91379
UL Model # 52-RMG
USE AND CARE GUIDE
SOUTHWIND 52-INCH CEILING FAN
Questions, problems, missing parts? Before returning to the store call
Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this ceiling fan. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
To view an instructional video on how to install this product:
1. Go to www.homedepot.com and enter either the Item or Model number, found in the top
right corner of the cover of this instruction manual, in the search eld.
2. Click on your product from the list of search results and click on the video link in the
“Product Overview” section.

Questions and Answers

  • E
    Elizabeth BoydJul 28, 2025
    What to do if my HAMPTON BAY SOUTHWIND will not start?
    • A
      Amanda LeonJul 28, 2025
      If your HAMPTON BAY Fan isn't starting, here are a few things to check: * Inspect the main and branch circuit fuses or breakers. * Verify the wire connections to the fan and switch wire connections in the switch housing. * Check the battery in the transmitter. * Make sure you are within the normal operating range of 10-20 feet. * Confirm that the dip switch settings are the same on both the transmitter and receiver. Remember to turn off the power supply before checking the dip switch settings.
  • B
    Brittany GonzalezAug 6, 2025
    Why is my HAMPTON BAY Fan so noisy?
    • T
      travis53Aug 6, 2025
      A noisy HAMPTON BAY Fan can be caused by several factors. Here's what to check: * Make sure all motor housing screws are snug. * Ensure the screws attaching the fan blade bracket to the motor hub are tight. * Confirm the wire nut connections aren't rattling against each other or the switch housing's interior wall. * Allow a 24-hour “breaking in” period, as most new fan noises disappear during this time. * If using a light kit, ensure the glassware screws are tight and bulbs are secure. * Verify the canopy has a small gap from the ceiling and isn't touching it. * Confirm the outlet box is secure and rubber isolator pads were used between the mounting plate and the outlet box.
  • M
    Michelle WatsonAug 16, 2025
    How to fix a wobbly HAMPTON BAY SOUTHWIND Fan?
    • V
      Valerie BaxterAug 16, 2025
      To address a wobbling HAMPTON BAY Fan, take these steps: * Ensure all blade and blade arm screws are secure. * Check blade levels: measure from a point on the ceiling to the center of each blade. Deviation should be within 1/8 inch. * Run the fan for ten minutes. * If the fan continues to wobble contact Customer Service and a balancing kit will be sent to you at no charge.

Summary

Safety Information

Installation

MOUNTING OPTIONS

Describes options for mounting the fan to the outlet box, including for existing boxes and new installations.

Assembly - Standard Ceiling Mount

3 Assembling the fan

Steps for attaching the downrod to the motor housing using hanger pin and locking pin.

Assembly - Close-To-Ceiling Mounting

Assembly - Hanging the Fan

3 Attaching the fan to the electrical box

Instructions for passing wires through the mounting bracket and securing it to the outlet box.

4 Hanging the fan

Guides on lifting the fan motor assembly and seating the hanger ball in the mounting bracket socket.

6 Installing the receiver

Guides on positioning the receiver and connecting it to the mounting bracket and fan wires.

7 Wiring the receiver to the household wiring

Details on connecting receiver wires to household wires (ground, neutral, hot) using wire nuts.

8 Making the electrical connection

Instructions for connecting fan motor wires (white, black, blue) to the receiver using wire nuts.

Assembly - Attaching the Fan Blades

Operating Your Fan and Remote Control

Troubleshooting

HAMPTON BAY SOUTHWIND Specifications

General IconGeneral
Fan Diameter (In.)52
Number of Blades5
ReversibleYes
Light Kit IncludedYes
Light TypeLED
Mounting TypeDownrod
MaterialMetal

Related product manuals