HAMPTON BAY SHANNON User Manual

THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBNLY AND
PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE FITTINGS
KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS PRODUCT .
ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD MAKE THIS
PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY BE
NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME. THIS IS
COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
FOR CLEANING YOU MAY USE A DAMP CLOTH(NOT WET). DO NOT USE
POLISH,DETERGENT OR CHEMICAL CLEANERS.
THIS PRODUCT MAY STAIN OR MARK IF ALLOWED TO COME INTO CONTACT
WITH WET OR DAMP OBJECTS AS MATERIALS USED HAVE NOT BEEN SCOTCH
GUARDED.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT, ALWAYS USE A PLACE
MAT UNDER HOT OR COLD ITEMS. PREVENT MARKING
SHANNON 4'6" BED
ASSEMBLY INSTRUCTIONS
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
FOR DOMESTIC USE ONLY
PAGE 1
SEC/SH/01/20/YF1
DO NOT
USE
!

HAMPTON BAY SHANNON Specifications

General

Type	Ceiling Fan
Number of Blades	5
Blade Span (in.)	52
Light Type	Integrated LED
Motor Type	AC
Light Kit Included	Yes
Reversible Motor	Yes
Finish	Brushed Nickel
Blade Material	Wood
Warranty	Lifetime

Summary

Important Product Information

Usage and Safety Guidelines

Crucial advice on safe assembly, usage, maintenance, and cleaning for product longevity and safety.

Product Components Identification

Parts List

Detailed inventory of all physical bed components with their respective quantities.

Hardware List

Comprehensive list of all fasteners, bolts, nuts, and included tools for assembly.

Assembly Steps Part 1

Step 1: Attach Feet to Headboard

Instructions for attaching the support feet to the headboard component.

Step 2: Attach Feet to Footboard

Instructions for attaching the support feet to the footboard component.

Step 3: Assemble Centre Rail System

Guide for assembling the main central support structure of the bed frame.

Assembly Steps Part 2

Step 4: Connect Side Rails

Attaching the main side rails to the headboard and footboard ends.

Step 5: Attach Centre Rails

Securing the central support rails to the already attached side rails.

Assembly Steps Part 3

Step 6: Secure Centre Cross Rail

Fixing the centre cross rail for enhanced structural stability.

Step 7: Install Slats and End Caps

Placing the mattress support slats and fitting the plastic end caps.