CLICK!
1
2
CHAIR POSITION
Problem: the lift does not travel in either direction and the display shows a “0”.
Cause: the seat is not locked and is in a swivelled position.
Solution:
swivel the seat using the handle located to the left or right under the seat,
until it “clicks” into position.
EMERGENCY STOP
Problem:
the lift does not travel in either direction, the
display shows a “0”
[1]
and the emergency stop [2] is pressed.
Cause: the emergency stop has been pressed.
Solution:
the emergency stop can be released by turning the emergency button.
CAUSE SOLUTION
CAUSE SOLUTION
USER MANUAL 19
To Next Page
Loading...
