EasyManua.ls Logo

Handicare MINIVATOR 2000 User Manual

Handicare MINIVATOR 2000
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION MANUAL
MINIVATOR 2000
XXXXXXXX
Question and Answer IconNeed help?

Do you have a question about the Handicare MINIVATOR 2000 and is the answer not in the manual?

Handicare MINIVATOR 2000 Specifications

General IconGeneral
Weight Capacity130 kg
Travel Speed0.15 m/s
TypeStairlift
Power Supply24V DC
Seat Width45 cm
Seat Depth40 cm
Armrest Height200 mm
Footrest Length30 cm
MaterialSteel

Summary

Pre-installation check list

Installation tools required

Lists all tools needed for stairlift installation.

Track assembly

Internal curve tracks

Explains the setup and characteristics of inside curve tracks.

Hinge track installations

Details the process for installing a folding hinge track section.

Electrical connections

Track electrical connections

Covers the wiring for the stairlift track and power supply.

Hinge track electrical connections

Explains specific wiring for hinge tracks, including comms contacts.

Power pack

Loading the power pack

Step-by-step guide for installing the power pack onto the track.

Inside curve rail

Seat base

Fitting the seat base

Instructions for attaching the seat base to the stairlift mechanism.

Fitting the seat back

Emergency Swivel Lever

Details on fitting the emergency swivel lever for the seat.

Electrical connections / upholstery

Electrical connections

Connects seat and footplate electrical components and controls.

Fitting the seat upholstery

Guides on attaching seat back, cushion, and arm upholstery.

Remote control handsets

Programming

Instructions for programming the remote control handsets for the stairlift.

Radio frequency remote control

Covers setup and troubleshooting for RF remote controls.

Positioning and Fitting RF Repeaters

Guide for installing RF repeaters to extend signal range.

Fitting the Handset Holder

Instructions for mounting the remote control holder.

Fixing the track

Fix the track to the stairs

Details on securely attaching the stairlift track to the staircase.

Testing

All Variants Testing

Comprehensive tests applicable to all stairlift configurations.

Specific Variant Testing

Tests for footplate, swivel, and hinge track variations.

Handover

Maintenance

Appendix 2

Diagnostic Codes

Explains error codes displayed by the stairlift for troubleshooting.

Appendix 3

Minivator 2000 Stairlift Schematics

Electrical diagrams for Minivator 2000 stairlift.

Minivator Smart Seat Schematics

Electrical diagrams for the smart seat components.

MS125 Internal RTC Reed Switch Connections

Wiring details for internal RTC reed switches.

Standard Track Wiring

Wiring diagrams for standard track configurations.

Hinge PCB and Schematic

Details on hinge control board connections and schematic.

MS125 2000 DIP Settings (Standard)

Configuration settings for standard LH/RH models.

MS125 2000 DIP Settings (Internal Bend)

Configuration settings for internal bend models.

MS125 2000 DIP Settings (Auto Hinge)

Configuration settings for auto hinge models.

MS125 2000 DIP Settings (Auto Swivel)

Configuration settings for auto swivel models.

Appendix 4

External track details

Provides specific details and measurements for external track installations.

Appendix 5

Inside track details

Provides specific details and measurements for inside track installations.

Related product manuals