Assembly
A. Push the rising ladder/tube down into the mounting fixture on the
base plate, so that the height-adjustment buttons are facing towards the
caregiver.
B. Insert the wing handles and tighten. Check to ensure that the wing
handles are securely tightened and that the ladder is solidly secured in
to the base plate before using the ReTurn.
General
Before the product is used, check to ensure that the screws are securely tightened. The product must be inspected
regularly by an authorized technician. The product must be inspected thoroughly at least once each year, or more
regularly if it is used very frequently. Inspection and service must be performed by an authorized technician.
3
SystemRoMedic
TM
A
B
To Next Page
