GB
58
Adjusting and connecting
Preparations before rear connection
The stove is prepared for top connection on delivery. When
connecting from the rear, the cover and connection must be
swapped around.
• Dismantle the cladding as instructed previously, see
page 55.
• Tap out the knock out in the stove’ s back panel, remember to
protect the floor.
• Then unscrew both the connector and the cover.
• Switch places and reinstall the screws.
Handöl 51
Adjusting the stove
• Position the stove on the hearth plate.
• Uninstall the rear sections of the legs.
• Adjust the height of the four adjustable
feet until the stove is horizontal.
• When the rear sections have been
reinstalled, cover the screws with the
plastic plugs supplied.
To Next Page
Loading...