GB
59
Adjusting and connecting
Preparations before rear connection
The stove is prepared for top connection on delivery. When
connecting from the rear, the cover and connection must be
swapped around.
• Dismantle the cladding as instructed previously, see page 55.
• Tap out the knock out in the stove’ s back panel, remember to
protect the floor.
• Then unscrew both the connector and the cover.
• Switch places and reinstall the screws.
Handöl 52 / 52T
Adjusting the stove
• Position the stove on the hearth
plate.
• Uninstall the inner covers of the
legs.
• Adjust the height of the four
adjustable feet until the stove is
horizontal.
• When the inner sections have
been reinstalled, cover the
screws with the plastic plugs
supplied.
To Next Page
Loading...