GB
60
Soapstone installation Handöl 52T
Handle soapstone with care, the edges
are susceptible to damage. Soapstone is
most easily cleaned using a cloth damp-
ened with acetone.
• Remove the upper securing plate.
• Position with the decorative groove downward
so that the turned up edge holds the soapstone
in place.
• Install and secure the upper securing plate so
that panel edge locks the soapstone.
• Do the same on the opposite side and then
position the soapstone cap.
• When connecting from behind, position the
cover provided over the hole for the top
connection.
A hotplate is available as an accessory for
installation in the hole in the top plate.
Continue with the section ”Connecting to the chimney” on page 64.
To Next Page
Loading...