4/ Problems you can have with the Handpresso Wild
4.1 When you pump, the pressure doesn’t increase
You have a problem with the pump sub assembly
2 solutions:
-change the pump sub assembly (page 7)
-fix the actual pump (page 10)
4.2 You have pumped, but the pressure doesn’t remain
Make a test to find the location of the problem:
-Put the infusion valve in pumping position (stop button pushed)
-Plunge the product into water (be careful that the air tank cap is not completely immersed into water –> no
water must enter in the pump system).
-Pump the device
-Look where the bubbles are coming out
1. Bubbles come from the bottom of the pump
You have a problem with the pump sub assembly
2 solutions:
-change the pump sub assembly (page 7)
-fix the actual pump (page 10)
2. Bubbles come from the manometer
You have a problem with the manometer sub assembly
-change the manometer sub assembly (page 14)
Maximum
Water level
To Next Page
Loading...
