H&S 175 - OPTIONAL EQUIPMENT AND PARTS ORDERING

-16-
PLEASE RECORD NUMBERS FOR YOUR UNIT FOR QUICK REFERENCE
ABOUT IMPROVEMENTS
H&S IS CONTINUALLY STRIVING TO IMPROVE ITS’ PRODUCTS.
We must therefore, reserve the right to make improvements or changes whenever it becomes practical to
do so, without incurring any obligation to make changes or additions to the equipment previously sold.
H&S Mfg. Co.
MARSHFIELD, WIS.
MOD. NO.
SER. NO.
INSTRUCTIONS FOR ORDERING PARTS
All service parts should be ordered through your authorized H&S dealer. He will be able to give you faster
service if you will provide him with the following:
1. Model & Serial Number - Both can be located on the front center bearing post below the PTO shaft.
2. All reference to left or right apply to the machine as viewed from the rear.
3. Parts should not be ordered from illustration only. Please order by complete part number.
4. If your dealer has to order parts - give shipping instructions:
VIA truck - large pieces (please specify local truck lines)
VIA United Parcel Service (include full address)
OPTIONAL EQUIPMENT
REAR PAN/SEMI-LIQUID HYDRAULIC ENDGATE
The rear pan shown below is optional equipment on the Model 175 and the semi-liquid hydraulic endgate
(pictured below right) is also optional. Rear pan and hydraulic endgate may be used together on this model.
REAR PAN
HYDRAULIC ENDGATE
175