Need help?Do you have a question about the Hangar 9 F4U-1D Corsair 60cc ARF and is the answer not in the manual?
General| Approximate Flying Weight | 18.5 - 20.5 lb (8.4 - 9.3 kg) |
|---|---|
| Radio | 6+ channel |
| Retracts | Yes |
| Flaps | Yes |
| Airfoil Shape | Semi-symmetrical |
| Construction | Balsa and plywood |
| Experience Level | Advanced |
| Covering | UltraCote |
| Hardware Included | Yes |
| Engine Size | 50cc - 61cc gas engine |
| Servos | 8+ servos required |
| CG (Center of Gravity) | 5.5 in (140mm) back from the leading edge at the root |
| Propeller Size | 22 x 10 - 24 x 10 |
| Fuel Tank Capacity | 24-32 oz (710-946 ml) |
| Scale | 1/5 |
| Build Time | 20+ hours |
| Motor Size | Not applicable |
Explains terms used in the product literature to indicate potential harm levels.
Use only compatible components for the product.
Fly only in open areas and recommended RC flying fields.
Keep loose items away from the propeller and keep hands clear.
Follow manufacturer instructions for battery use and disposal.
Kit includes small parts, keep unattended children away.
Install the Evolution 777 engine using the drill template and photo.
Install the Saito FG57 engine using the drill template and photo.
Instructions for adding weight to the nose for proper balance.
Adjusting elevator input based on flap position.
Details what the warranty covers and what it excludes.
Outlines liability limits and governing law for the warranty.
Explains how to obtain warranty service, including requirements and procedures.
Details the process and costs for non-warranty repairs and service.
Outlines general rules for flying model aircraft safely and responsibly.
Details safety guidelines for operating RC model aircraft, including range checks and site rules.
Provides information on FAA regulations and local modeling association guidelines.
To Next Page