Hangar 9 Clipped-wing Taylorcraft User Manual

INSTRUCTION MANUAL
WE GET PEOPLE FLYING
TM
TM
Specifications
Wingspan: . . . . . . . . . . . . . . . . . . . . . . . 85
1
/
2 in . . . . . . . . . 2172 mm
Length: . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 in . . . . . . . . . 1702 mm
Wing Area: . . . . . . . . . . . . . . . . . . . . 1315 sq in . . . . . . . . . 84.4 dm sq
Flight Weight: . . . . . . . . . . . . . . . . . . 13–15 lb . . . . . . 5.9–6.8 kg
Recommended Engines: . . . . . . . . . . . . . . . . . . . . 1.08 - 1.48 2-Stroke
1.20 - 1.82 4-Stroke
Zenoah .23 Gas
• 90% prebuilt
• Giant scale legal
• Precovered with genuine UltraCote
®
• Featuring one-of-a-kind scale trim scheme
• Prefinished fiberglass cowl
• Gas or glow option

Hangar 9 Clipped-wing Taylorcraft Specifications

General

Brand	Hangar 9
Model	Clipped-wing Taylorcraft
Category	Toy
Language	English

Summary

Additional Required Equipment

Radio Equipment Systems

Lists required radio components like channels, servos, and battery packs for the model.

Engines

Details recommended 2-cycle, 4-cycle, and gas engines for the model.

Section 1: Hinging the Ailerons

Section 2: Joining the Wing Halves

Section 3: Installing the Aileron Servos

Section 4: Installing the Aileron Linkages

Section 5: Mounting the Wing to the Fuselage

Section 6: Installing the Tail (Vertical and Horizontal Stabilizer)

Section 7: Hingging the Horizontal Stabilizer and Elevators

Section 8: Hingging the Rudder and Installing the Tail Wheel

Section 9: Installing the Control Horns

Section 10: Installing the Main Landing Gear and Wheel Pants

Installation of Wheel Pants

Detailed steps for attaching the wheel pants to the main landing gear, including drilling and mounting.

Section 11: Installing the Engine (Glow)

Section 12: Installing the Engine (Gas)

Installation of Engine (Gas)

Steps for installing the Zenoah G-23 gas engine, including safety and weight considerations.

Section 13: Assembling and Installing the Fuel Tank (Glow/Gas)

Section 14: Installing the Radio

Servo Placement and Mounting

Receiver and Component Installation

Section 15: Installing the Control Linkages

Section 16: Attaching the Cowling

Section 17: Attaching the Windshield, Side Windows, and Overhead Window

Section 18: Assembling and Installing the Wing Struts/Tail Braces

Wing Struts Installation

Tail Braces Installation

Section 20: Control Throw Recommendations

Section 21: Balancing the Clipped-Wing Taylorcraft

Preflight at the Field

Range Test Your Radio

Adjusting Your Radio and Engine