Hangar 9 CAP 232 User Manual

ALMOST READY-TO-FLY
PRE-BUILT
90
%
INSTRUCTION MANUAL
WE GET PEOPLE FLYING
TM
TM
Specifications
Wingspan: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73′′
Length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
1
/
4
′′
Wing Area:. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1031 sq. in.
Weight (Approx.):
. . . . . . . . . . . . . . . . . . . 11–12 lbs.
Recommended Engines:1.08 –1.20 2-Stroke
1.20 –1.50 4-Stroke
• 90% pre-built
• Highest quality Du-Bro and Sullivan hardware included
• Pre-covered in genuine UltraCote
®
featuring Matt Chapman’s
full scale trim scheme
• Pre-finished fiberglass cowl and wheel pants

Hangar 9 CAP 232 Specifications

General

Brand	Hangar 9
Model	CAP 232
Category	Toy
Language	English

Summary

Additional Equipment Required

Radio Equipment

Engines

Tools and Supplies Required

Adhesives

Tools

Section 1. Hinging the Ailerons

Section 2. Joining the Wing Halves

Section 3: Installing the Aileron Servos

Section 4: Installing the Aileron Linkage

Section 5: Mounting the Wing to the Fuselage

Section 6: Installing the Tail

Section 7: Hinging the Horizontal Stabilizer and Elevator

Section 8: Hinging the Rudder and Installing the Tail Wheel

Section 10: Installing the Main Landing Gear

Section 12: Installing the Engine

Section 13: Assembling and Installing the Fuel Tank

Section 14: Installing the Radio

Section 15: Installing the Control Linkages

Section 16: Attaching the Cowling

Section 18: Balancing the CAP 232

Section 19: Control Throw Recommendations

Pre-Flight at the Field

Range Test Your Radio

Verifies radio system function and control range before flying.

Adjusting the Engine

Guides on setting engine performance for reliable operation.

AMA Safety Code

General

Outlines fundamental safety rules for model aircraft operation.

Radio Control