4
Tools and Supplies Required
Adhesives
Thin CA (cyanoacrylate) glue
Thick CA (cyanoacrylate) glue
6-minute epoxy
12-minute epoxy
30-minute epoxy
Blue Locktite 242
Canopy glue (R/C 56)
Silver solder (Stay Brite)
Tools
Drill
Drill bits: 1/16′′, 5/32′′, 1/4′′, 1/8′′
Soldering iron
Small Phillips screwdriver
Medium Phillips screwdriver
Z-bend pliers
Pliers
1
/
16
′′ hex wrench
Small round file
Moto-Tool with sanding drum
Hobby knife with #11 blade
Mixing stick
Epoxy brush
90-degree triangle
Sanding stick (medium or fine)
Medium sandpaper
Masking tape
Straight edge
Measuring device (e.g., ruler, tape measure)
Scissors
Paper towels
Wax paper
Rubbing alcohol
Felt tipped pen
Optional Equipment
Radio packing foam
Antenna tube
To Next Page
Loading...
