2
Table of Contents
Introduction 3
Warning 3
Additional Equipment Required 3
Tools and Supplies Required 4
Contents of Kit 5
Section 1: Hinging the Ailerons 6
Section 2: Joining the Wing Halves 8
Section 3: Installing the Aileron Servos 12
Section 4: Installing the Aileron Linkages 14
Section 5: Mounting the Wing to the Fuselage 16
Section 6: Installing the Tail (Vertical and Horizontal Stabilizer) 19
Section 7: Hinging the Horizontal Stabilizer and Elevator 22
Section 8: Hinging the Rudder and Installing the Tail Wheel 23
Section 9: Installing the Control Horns 25
Section 10: Installing the Main Landing Gear 28
Section 11: Assembling and Mounting the Wheel Pants 29
Section 12: Installing the Engine 31
Section 13: Assembling and Installing the Fuel Tank 32
Section 14: Installing the Radio 34
Section 15: Installing the Control Linkages 36
Section 16: Attaching the Cowling 38
Section 17: Attaching the Canopy 40
Section 18: Balancing the CAP 41
Section 19: Control Throw Recommendations 41
Pre-Flight at the Field 42
AMA Safety Code 43
To Next Page
Loading...
