Introduction
Congratulations on your purchase of one of the finest ARFs to be produced! The Hangar 9 CAP 232 is a high-performance aircraft best
suited for the more experienced flyer and modeler. Although this is an ARF (Almost-Ready-to-Fly) kit, it does have some construction
features that can be challenging for a new modeler. If you encounter difficulty in any construction sequence, please feel free to contact
one of our technicians—we stand ready to provide any assistance we can concerning the construction of your CAP. You can contact
us at 217-355-9511.
Warning
An R/C aircraft is not a toy! If misused it can cause serious bodily harm and damage to property. Fly only in open areas, preferably
AMA (Academy of Model Aeronautics) approved flying sites, following all instructions included with your radio and engine.
Additional Equipment Required
Radio Equipment
4 Channels (minimum)
5 Standard Servos
Standard 600–1000 mAh Receiver Battery Pack
Y-Harness (if a non-computer radio is used)
Engines
1.08-1.2 2-Cycle Engines
1.20-1.50 4-Cycle Engines
Recommended 2-Cycle Engines Recommended 4-Cycle Engines
Webra 1.20 Saito 1.20 - 1.50
Saito 1.20GK - 1.50GK
Parts
Aileron Extension (2) (JRPA114, 12′′ silver) Tru–Turn Adaptor (for appropriate engine)
3′′ Tru–Turn Spinner (TRU3002) Dubro Kwik Fueler Valve
3
Recommended JR Systems
JR XF642
JR XP783
JR XP8103
PCM10SxII
Propeller
Fuel Filter
Foam for Cushioning Tank
Fuel Tubing
To Next Page
Loading...
