EasyManua.ls Logo

Hangar 9 80" CAP 232 User Manual

Hangar 9 80" CAP 232
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTRUCTION MANUAL
Specifications:
Wingspan: .................................................................................................................. 80 in (2032 mm)
Length: ..................................................................................................................... 70
1
/4 in (1784 mm)
Wing Area: .................................................................................................... 1248 sq in (80.5 sq dm)
Weight (Approx.): .......................................................................................... 14 –16 lb (6.4 –7.3 kg)
Scale: ................................................................................................................................................... 27%
Recommended Engines: 1.80–2.18 2-Stroke
Saito
300 Twin 4-Stroke
Zenoah
®
G-38–G-45 Gasoline Engine
• 90% prebuilt
• Precovered in genuine Hangar 9
UltraCote
®
covering
• Prefinished fiberglass cowl and wheel pants
• Designed by 8-time TOC competitor Mike McConville
TM
Ultra Aerobatic 80" ARF
Question and Answer IconNeed help?

Do you have a question about the Hangar 9 80" CAP 232 and is the answer not in the manual?

Hangar 9 80" CAP 232 Specifications

General IconGeneral
Wingspan80 in (2032 mm)
Recommended Engine1.20-1.60 2-stroke
Skill LevelIntermediate
Radio6+ channel
Servos6 servos required
Trim Scheme ColorsWhite, Red
Fuel Tank16 oz

Summary

Important Safety Warning

Section 1: Hinging and Sealing the Ailerons

Section 2: Joining the Wing Halves

Section 3: Installing the Aileron Servos

Section 4: Installing the Aileron Control Horns

Section 5: Installing the Aileron Linkages

Section 6: Mounting the Wing to the Fuselage

Section 7: Installing the Tail

Section 8: Hinging the Horizontal Stabilizer and Elevators

Section 9: Hinging the Rudder and Installing the Tail Wheel

Section 10: Installing the Radio

Section 11: Installing the Elevator Servos

Section 12: Installing the Elevator Horns and Linkages

Section 13: Installing the Rudder, Control Horns, and Pull-Pull Linkages

Section 14: Installing the Main Landing Gear

Section 15: Assembling and Mounting the Wheel Pants

Section 16: Installing the Engine

Section 17: Assembling and Installing the Fuel Tank

Section 18: Installing the Throttle Control Linkage

Section 19: Attaching the Cowling

Section 20: Mounting the Canopy

Section 22: Balancing the 80" CAP 232

Preflight at the Field

Essential pre-flight checks including radio range, control direction, battery status, and linkage security.

Related product manuals