Hangar 9 Twist 3D .40 - User Manual

Specifications
Wingspan: ..............47.75 in (1212.85mm)
Length: ...................48.38 in (1228.73mm)
Wing Area: ............747.37 sq in (48.2 sq dm)
Weight:...................5.0–6.0 lb (2.27 kg–2.72 kg)
ASSEMBLY MANUAL
Twist
™
3D .40 ARF
WE GET PEOPLE FLYING
TM
®
Engines: ...................40–.46 2-stroke
.56–.72 4-stroke
Radio:......................4-channel w/5 servos
• Great sport 3D performer
• Covered in genuine UltraCote
®

Summary

Required Radio and Engine

Radio Equipment

Specifies the necessary radio system components, including transmitter, receiver, and servos.

Section 1: Attaching the Wing to the Fuselage

Section 2: Installing the Horizontal Stabilizer

Section 3: Installing the Vertical Stabilizer

Section 4: Installing the Ailerons

Section 5: Installing the Elevators

Section 6: Installing the Tail Wheel

Section 7: Installing the Rudder

Section 8 A: Engine Installation

Section 8 B: Electric Motor Installation

Section 9: Throttle Pushrod Installation

Section 10: Fuel Tank Assembly

Section 11: Fuel Tank Installation

Section 12: Landing Gear Installation

Section 13: Radio Installation

Section 14: Linkage Installation

Section 15: Canopy Installation

Adjusting the Engine

Recommended CG

2004 Official AMA National Model Aircraft Safety Code

GENERAL

Covers general safety rules applicable to all model aircraft flying activities.

RADIO CONTROL

Details safety protocols specific to radio-controlled aircraft operations.

Organized RC Racing Event

Outlines safety guidelines and rules for organized radio-controlled racing events.

Hangar 9 Twist 3D .40 Specifications

General

Construction	Balsa and plywood
Covering	UltraCote
Skill Level	Intermediate
Weight	5.5-6.5 lb (2.5-2.95 kg)
Engine	.40-.46 2-stroke or .56 4-stroke
Radio	4+ channel
Servos	4