76
16. Related Safety Instruction and Standard(For CE)
For trucks exporting to Europe or option.
The model by CE certification which according to the following instruction and standard:
– DIRECTIVE 2006/42/EC OF THE EUROPEAN PAMENT AND OF THE COUNCIL,
DIRECTIVE 2000/14/EC OF THE EUROPEAN PAMENT AND OF THE COUNCIL,
EN1726-1:1998(Engineering Industry truck safety standardize), EN12053:2001,
EN1175-1:1998, EN13059:2002 coordinate standard.
– Main safety factor will be according with DIRECTIVE 2006/42/EC OF THE EUROPEAN
PAMENT AND OF THE COUNCIL and EN1726-1:1998、EN1175-1:1998 standard.
– The design and manufacture of electrical element comply with the low voltage standard
2006/95/EC.
– Noise will be according with EN12053:2001 and 2000/14/EC.
Sound pressure level on the operator‟s position is lower than 75dB(A), measurement
uncertainty is 1.5dB(A).
Vibration parameters are measured according to standards of ISO5349-2:2001,
EN13059:2002, ISO2631-1:1997, and the result meets the requirement of 2002/44/EC.
Whole body vibration is lower than 1.1m/s
2
.
– Electromagnetism compatibility is measured according to standard of EN12895:2000，and
meets the requirement of 2004/108/EC.
To Next Page
Loading...