17
Seat
Desigend maximum comfort, this seat can be adjusted as follows.
Adjusting the seat to the driver's weight:
To achieve optimal seat cushioning the driver‟s seat must be adapted to the driver‟s weight.
– Sit on the driver‟s seat. When the correct weight adjustment has been made, the weight
adjustment lever should be aimed at the driver's weight. If the weight adjustment lever ① is
facing too far to the left or right, the seat must be adjusted to the driver's weight.
– To set the seat to a lesser weight, push the weight adjustment lever ① left.
– To set the seat to a greater weight, push the weight adjustment lever ① right.
To adjust the seat position:
– Pull up the longitudinal adjuster ② and push the driver‟s seat forwards or backwards to the
desired position.
– Engage the longitudinal adjuster ② in position again.
WARNING
The longitudinal adjuster must be securely located in the desired position. The
driver’s seat setting must not be changed during travel.
To adjust the backrest:
– Sit on the driver‟s seat.
– Press down the backrest adjustment button ③ and adjust the backrest tilt.
– Release the backrest adjustment button ③ to lock the backrest in position.
To Next Page
Loading...